You pick the actual slab off a real Austin slab floor. Then the same crew templates, fabricates and installs it from start to finish.
Replacing kitchen countertops is a direct job that changes how the room works and looks. If your current counters are laminate, tile, or an older stone that no longer suits the house, the process is straightforward but involves a few decisions before the crew arrives. In Austin, where housing runs from mid-century bungalows in the central neighborhoods to newer builds out northwest and southeast, the condition of your existing countertop and the cabinets underneath will guide what happens next.
The crew handles the entire replacement from start to finish. They remove the old countertop and any backsplash that is attached to it. If the backsplash is a separate piece that continues behind the counter, it usually comes off as part of the tear out. The cabinets underneath stay in place unless they are damaged or need modification. The crew checks that the cabinet structure is sound and level before they template the new slab. If the cabinets are not level, that gets addressed first.
Once the old surface is gone, the crew templates the slab directly on your cabinets. They take measurements for the sink cutout, cooktop opening, and any seams. The slab is then fabricated off site and brought back for installation. Sink cutout and sink set are included in the fabrication work. The backsplash is handled during installation. If you are keeping the existing backsplash tile, the crew works around it. If you want a new backsplash, that is a separate job, but the crew can advise on the order of work.
You go to a direct importer slab floor in Austin with 299 lots on the floor. You see the actual stone, not a sample. Materials include granite, quartzite, engineered quartz, marble, dolomite, soapstone, porcelain slabs, and semi precious. For rental grade or flip grade stone, the crew works with a slab selection partner so you do not have to pay for a showpiece slab.
The same crew that templates the slab also fabricates and installs it. That means one point of contact and one crew that knows the job from start to finish. There is no hand off between a template team and a separate install team. The crew sees the slab on the floor and brings that knowledge to your kitchen.
The sink cutout and sink set are included in the fabrication work. That means the crew cuts the opening for your sink and sets the sink into the countertop. The cost of that work is part of the fabrication, not an extra charge. You provide the sink, and the crew handles the rest.
The crew removes the old countertop and any backsplash that is attached to it. In most kitchens, the backsplash is a separate piece that sits on top of the counter and is caulked at the seam. That backsplash comes off with the counter. If the backsplash continues behind the counter and is tiled to the wall, the crew cuts the counter free from the tile. The tile stays in place, but the seam will need to be addressed after the new counter is installed.
If you are keeping the existing backsplash tile, the crew works around it. The new countertop is cut to fit against the existing tile. The gap is caulked. If the tile is old or damaged, the crew can advise on whether it should be replaced. A new backsplash is a separate job, but the crew can tell you the best order to do the work. Usually, the countertop goes in first, then the backsplash is installed on top of it.
The cabinets underneath are not removed during the countertop replacement. The crew checks that the cabinets are level and sound. If the cabinets are not level, the crew can shim the countertop or adjust the cabinets. If the cabinets are damaged or need to be replaced, that work is done before the countertop replacement. The crew can tell you what condition your cabinets are in when they do the template.
Slab selection happens at the direct importer slab floor in Austin. You walk the floor and pick the actual slab that will become your countertop. The slab is a single piece of stone, usually around 9 feet by 5 feet, and it is the same slab that gets cut and installed in your kitchen. There is no variation between a sample and the final product because you see the real thing.
When you look at slabs, you check for veining, color variation, and any natural features like fissures or pits. Granite is a natural igneous stone that is hard and heat tolerant but porous enough to want sealing. Quartzite is metamorphosed sandstone and is very hard, though some slabs sold as quartzite are softer and behave more like marble. Marble is calcium based and etches from acids like lemon and vinegar regardless of sealing. Engineered quartz is made from ground stone and resin, is non porous, needs no sealing, and can be damaged by direct heat and by long UV exposure outdoors.
The crew can help you understand how a particular slab will perform in a kitchen. If you are working with a budget for a rental or flip property, the crew works with a slab selection partner who has stone that is functional and looks good but does not carry the price of a showpiece slab. That way you get a solid countertop without paying for a premium look that the tenant or buyer may not value.
After the old countertop is removed and the cabinets are checked, the crew templates the new slab directly on your cabinets. They use a measuring system to record the exact dimensions, sink location, cooktop opening, and any seams. The template is a physical or digital record that the fabrication shop uses to cut the slab. The crew takes into account the overhang, the edge profile, and the backsplash height.
Fabrication happens off site. The slab is cut to the template, the edges are profiled, and the sink cutout is made. The crew handles the sink cutout and sink set as part of the fabrication work. The finished pieces are then brought to your home for installation. The crew gives you the timeline in writing with the quote, so you know when to expect the install.
During installation, the crew sets the slabs on the cabinets, seams are glued and clamped, and the sink is set. The backsplash is addressed. If you are keeping the old tile, the crew caulks the gap. If you are installing new backsplash later, the crew leaves the wall ready for that work. The crew cleans up the job site and makes sure the countertop is level and secure.
In Austin, the housing stock varies. Mid-century bungalows in the central neighborhoods often have smaller kitchens with less counter space. Slabs that are 2 centimeters thick can be used in these kitchens if the cabinets are in good shape, but the crew may recommend a 3 centimeter slab for durability. Newer builds out northwest and southeast often have larger kitchens with islands, which means longer seams and potentially more complex templates.
One honest downside is that natural stone like marble etches. No sealer prevents etching from lemon juice, vinegar, or wine. If you cook with citrus or have a busy kitchen, marble may not be the best choice. Quartzite, while very hard, can be variable. Some slabs sold as quartzite are actually softer and may etch or scratch more easily. The crew can help you identify what you are actually buying.
Another consideration is the sink. Undermount sinks are common with stone countertops, but they require the sink cutout to be precise. The crew includes the sink cutout and sink set in the fabrication work, so that is handled. But if you choose a farmhouse sink or a flush mount sink, the installation is different and the crew will discuss that during the quote. The backsplash also matters. If you are replacing the backsplash later, the countertop should go in first so the backsplash sits on top of the stone.
To get started, call the crew at (512) 297-7493 or email info@atxgraniteking.com. They are reachable seven days a week. Tell them you want a kitchen countertop replacement in Austin. They will ask about your current countertop material, the size of the kitchen, and whether you have a slab in mind. If you do not have a slab picked out, they can direct you to the slab floor or the selection partner for rental grade stone.
The crew gives a straight quote over the phone or in person. They do not quote a price per square foot online because the cost depends on the slab you choose, the edge profile, the sink cutout, and the complexity of the install. The quote is written and includes the timeline. The crew does not promise same day or next day installation. They give you a date range that they stick to.
When you are ready, the crew schedules the tear out and template. They remove the old countertop and backsplash, check the cabinets, and template the new slab. Then they fabricate and install. The whole process is handled by one crew from start to finish. If you have questions about the slab, the backsplash, or the cabinets, call and ask. The crew answers directly and honestly.
$38 per square foot, cut, measure, and install included. Jobs over 1,000 square feet: $30 per square foot.
Sink cutout and sink set are included in the fabrication work. Non standard work is still quoted before work begins. Send the rough square footage and the rooms involved, or call (512) 297-7493 for a straight quote.
No. The crew handles the tear out as part of the job. They remove the old countertop and any backsplash attached to it. They also disconnect the sink and cooktop if needed. You do not need to do any demolition. The crew takes away the old material and leaves the job site clean.
The crew checks the cabinets during the template visit. If the cabinets are not level, they can shim the countertop or adjust the cabinets. If the cabinets are damaged or need replacement, that work should be done before the countertop goes in. The crew can tell you what condition your cabinets are in and advise on the next steps.
Yes, in most cases. The crew cuts the new countertop to fit against the existing backsplash tile. The seam is caulked. If the tile is old or damaged, the crew can advise on whether it should be replaced. A new backsplash is a separate job, but the crew can tell you the best order to do the work.
The crew gives you the timeline in writing with the quote. They do not promise a specific number of days because the timeline depends on slab availability, fabrication schedule, and other jobs. But they give you a date range and stick to it. You will know the timeline before you commit.
Natural stone can have fissures, pits, or other features that are not defects. The crew can point these out when you pick the slab. In most cases, these features are part of the stone's character and do not affect performance. If a flaw is a structural concern, the crew will advise you to choose a different slab. You see the actual slab on the floor, so you know what you are getting.
Tell us the rooms, the rough square footage and what you have in mind for kitchen countertop replacement in austin. You get a number for the whole job, in writing, before anyone cuts anything.