You pick the actual slab off a 299-lot Austin floor. One crew handles the rest, start to finish, in Cedar Park.
Most Cedar Park kitchens built in the 1990s and 2000s came with laminate or tile countertops. When those surfaces wear out, homeowners want something that lasts longer and handles daily use without constant upkeep. Granite is a natural igneous stone that forms deep underground. It’s hard, heat-tolerant, and comes in patterns you won’t find in engineered materials. But it’s also porous, so it needs sealing to resist stains and bacteria.
Because granite is natural, every slab is different. That means the color, veining, and even the hardness can vary from one end of the slab to the other. You won’t know exactly how your countertop will look until you pick the actual piece that will be cut for your kitchen. There’s no sample that can show you the full picture, only the slab itself.
In Williamson County, where homes are often updated for resale or long-term living, homeowners want countertops that hold up under real use. Granite does that, but it’s not indestructible. It can chip on the edges, scratch if you cut directly on it, and stain if spills sit too long. Sealing helps, but it’s not a one-time fix, it’s part of regular maintenance.
You pick the slab in Austin, then the same crew templates your Cedar Park kitchen, fabricates the countertop, and installs it. No handoffs, no middlemen, no surprises in scheduling or quality. The crew that measures is the crew that cuts, so what you see on the slab floor is what you get in your home.
Fabrication covers the sink cutout, polish, and installation of the sink. No extra charge for the cut, no separate plumber needed for the sink set. The crew handles it as part of the job, so you don’t have to coordinate multiple trades.
The stone comes from a 299-lot Austin slab floor, not a distributor. You walk the floor, see the actual slabs, and pick the one that goes into your kitchen. No guessing from a small sample, what you choose is what gets delivered.
Granite is a natural stone that forms when molten rock cools slowly underground. It’s made mostly of quartz, feldspar, and mica, which give it its hardness and patterns. Because it’s natural, no two slabs are identical. The color, veining, and even the density can change from one end of the slab to the other. That means the piece you pick in Austin might have more movement or darker spots than the sample you saw online.
In a kitchen, granite holds up well to heat, so you can set a hot pan down without melting or scorching the surface. It’s also hard enough to resist scratches from knives, though cutting directly on it will dull your blades and can leave marks over time. The downside is that granite is porous. Without sealing, liquids like oil, wine, or juice can soak in and leave stains. Sealing fills the pores and makes the surface more resistant, but it’s not permanent. In most cases, you’ll need to reseal every one to two years, depending on how much use the countertop gets.
Granite also has natural fissures, small cracks that form as the stone cools. These aren’t structural weaknesses, but they can collect dirt if they’re not properly sealed. Some homeowners like the natural look of fissures, while others prefer slabs with fewer visible lines. The crew can point out which slabs have more movement and which are more uniform when you’re making your selection.
The slab floor in Austin has 299 lots, so you have plenty of options. You’ll walk the floor with the crew, who can show you which slabs are best for kitchens and which have more variation or softer spots. They’ll also help you visualize how the slab will look once it’s cut for your Cedar Park kitchen. The edges, backsplash, and cutouts for the sink and cooktop all affect how the final pattern flows across the countertop.
Because granite is natural, what you see on the floor is what you get. There’s no dye lot or batch number, each slab is unique. That means if you see a slab you like, you should claim it before someone else does. The crew will tag it and reserve it for your job. If you’re unsure, you can take a small piece home to see how it looks in your kitchen lighting, but the full slab is the only way to know the exact pattern and color.
For rental or flip properties, the crew works with a partner to source more affordable slabs. These aren’t showpiece stones, but they’re still durable and look good in a kitchen that doesn’t need a high-end finish. The process is the same: you pick the slab, the crew templates and installs it, and you get a countertop that fits the budget without sacrificing durability.
Granite countertops come in different finishes, but the most common are polished and honed. Polished granite has a glossy surface that reflects light and makes the colors pop. It’s the easiest to clean and shows the least amount of wear, but it can be slippery if water sits on it. Honed granite has a matte finish that’s smoother to the touch and hides scratches better, but it’s more porous and needs more frequent sealing to prevent stains.
The edge profile affects both the look and the durability of the countertop. A simple eased edge is the most affordable and the least likely to chip, but it doesn’t have much detail. A bullnose edge is rounded on both the top and bottom, which makes it safer for households with kids but can show wear faster. More decorative edges, like ogee or dupont, add style but can be more prone to chipping if something heavy hits them. The crew will show you samples of each edge so you can see how they look with your slab.
In Cedar Park, where many homes were built in the 1990s and 2000s, homeowners often choose edges that match the style of the house. A traditional home might look better with a classic ogee edge, while a modern kitchen might suit a simpler eased or waterfall edge. The crew will template your kitchen and show you how each edge will look with your slab before they cut anything, so you can make the final decision based on the actual stone.
Granite is durable, but it’s not maintenance-free. The biggest tradeoff is sealing. Without it, the stone can absorb liquids and develop stains that are hard to remove. Even with sealing, granite can still etch from acidic liquids like lemon juice or vinegar, though the damage is usually less noticeable than on marble. The crew will seal the countertop when they install it, but you’ll need to reseal it periodically to keep it protected.
Another tradeoff is weight. Granite is heavy, so your cabinets need to be sturdy enough to support it. In older Cedar Park homes, the crew might need to reinforce the cabinets before installation. They’ll check the structure during the template visit and let you know if any repairs are needed. If your cabinets aren’t up to the job, you might need to replace them or choose a lighter material like quartz.
Granite also has natural imperfections. Fissures, pits, and color variations are part of the stone’s character, but they can be a downside if you prefer a uniform look. Some slabs have more movement than others, and the crew can help you pick one that fits your style. If you want a countertop that looks the same everywhere, an engineered material like quartz might be a better choice.
The first step is to call for a straight quote. The crew will come to your home, measure your kitchen, and give you a written estimate with dates for templating and installation. They’ll also schedule a time for you to visit the slab floor in Austin to pick your stone. Because every slab is different, the crew won’t cut anything until you’ve made your selection.
Once you’ve picked your slab, the crew will template your kitchen. This involves making a precise map of your countertop, including the sink, cooktop, and any other cutouts. The template is used to cut the slab, so it’s important to have all your appliances and fixtures in place before this step. If you’re also replacing your sink or faucet, the crew can coordinate the installation so everything fits together.
After templating, the crew will fabricate your countertop and schedule the installation. They’ll handle the sink cutout and set, so you don’t need to hire a separate plumber. The whole process, from slab selection to installation, is handled by the same crew, so there’s no miscommunication between trades. When the job is done, you’ll have a countertop that’s custom-cut for your Cedar Park kitchen and built to last.
$38 per square foot, cut, measure, and install included. Jobs over 1,000 square feet: $30 per square foot.
Sink cutout and sink set are included in the fabrication work. Non standard work is still quoted before work begins. Send the rough square footage and the rooms involved, or call (512) 297-7493 for a straight quote.
In most cases, granite needs to be resealed every one to two years. The exact timing depends on how much use the countertop gets and how well it was sealed initially. The crew will seal the countertop when they install it, but you’ll need to maintain it over time. If liquids start to bead up on the surface, it’s time to reseal.
Granite is heat-tolerant, so you can set a hot pan down without damaging the surface. However, extreme temperature changes, like placing a hot pan on a cold countertop, can cause the stone to crack. It’s best to use a trivet or hot pad to protect the countertop and your cookware.
Granite can chip on the edges if something heavy hits it, and cracks can form if the stone is stressed. Small chips can sometimes be repaired with epoxy, but larger damage might require replacing the affected section. The crew can assess the damage and let you know your options. Prevention is the best approach, avoid dropping heavy objects on the countertop and make sure your cabinets are properly supported.
Granite is durable and holds up well in rental kitchens, but it’s not the only option. For rental or flip properties, the crew works with a partner to source more affordable slabs that still look good and last. These slabs are less expensive than showpiece stones but are still hard enough to withstand daily use. The crew can show you options that fit the budget without sacrificing quality.
A honed finish is smoother and hides scratches better than a polished finish, but it’s more porous and needs more frequent sealing. It also shows stains more easily, especially from oils and acidic liquids. If you choose a honed finish, you’ll need to be diligent about wiping up spills and resealing the countertop regularly to keep it looking its best.
Tell us the rooms, the rough square footage and what you have in mind for granite countertops in cedar park. You get a number for the whole job, in writing, before anyone cuts anything.