We template, fabricate, and install slabs you pick from a real Austin floor. If the damage is fixable, we fix it. If it’s not, we replace it.
Countertops take a beating. Hot pans, dropped knives, years of spills, sooner or later, something gives. A chip, a crack, a seam that’s pulling apart, or a surface that’s just lost its shine. The question isn’t whether it happened, but what to do about it.
Repairing can save time and avoid the hassle of a full replacement, but it’s not always the right call. Some damage is too deep, some materials don’t hold up to fixes, and some repairs just don’t last. Other times, replacing is the only honest answer, especially if the slab is outdated, the layout doesn’t work, or the damage is widespread.
We don’t push one solution over the other. We look at the slab, the damage, and the kitchen or bathroom it’s in, then tell you what makes sense. If repair is possible, we do it. If replacement is the better move, we handle that too, same crew, start to finish.
You pick the slab from our Austin floor, then the same crew templates, cuts, and installs it. If repair is the call, we handle that too. No handoffs, no middlemen, no surprises between the quote and the finished job.
We work with a direct importer slab floor in Austin with 299 lots on the floor. You see the actual slab that goes into your home, not a sample or a catalog photo. For rental or flip-grade projects, we source through a trusted partner so you’re not paying for premium stone where it’s not needed.
Fabrication covers sink cutout and sink set, whether you’re repairing around an existing sink or replacing the whole countertop. No extra charges for the cut, no surprises when the crew shows up.
Chips are the most common call. A corner takes a hit from a pot or a glass, and a piece breaks off. Small chips, under half an inch, can often be filled and polished to blend in, especially on darker or heavily patterned stones like granite. Larger chips or those on light, solid surfaces are harder to hide. The fill material may not match perfectly, and the repair can stand out under direct light.
Cracks come in two types: hairline and structural. Hairline cracks are surface-level and don’t affect the countertop’s strength. They can sometimes be filled and polished, but the crack may still be visible, especially on glossy finishes. Structural cracks run deeper and can worsen over time, especially if the countertop is supporting weight or spanning a long run without proper support. These usually mean replacement is the safer call.
Seam failures happen when the adhesive holding two slabs together weakens or shifts. This can be from movement in the cabinets, poor initial installation, or just years of use. If the seam is just separating but the slabs are still level, it can sometimes be re-glued and re-leveled. If the slabs have shifted or the seam is in a high-stress area, like over a dishwasher or sink, replacement is usually the better long-term fix.
Dull spots or etching show up on calcium-based stones like marble, dolomite, and some quartzites. These aren’t cracks or chips, they’re chemical burns from acids like lemon juice, vinegar, or some cleaners. Sealing helps prevent stains but won’t stop etching. Polishing can restore the shine, but the spot may still be visible, especially on darker stones. If the etching is widespread, replacement is often the cleaner solution.
For chips, the crew cleans out the damaged area, fills it with a color-matched epoxy or resin, then polishes it to blend with the surrounding stone. The repair is strongest on hard stones like granite and quartzite, where the fill material can bond well. On softer stones like marble or some quartzites, the repair may not hold as long or may stand out more. The fill won’t be as hard as the original stone, so it can chip again if hit in the same spot.
Cracks are filled with a similar epoxy or resin, but the repair is more about preventing further damage than making the crack invisible. The crew may reinforce the underside of the countertop with a metal or fiberglass mesh to add stability. This works for hairline cracks but won’t fix a structural issue. If the crack is in a high-traffic area or near a sink, the repair may not last, and the crack could reopen over time.
Seam repairs involve cleaning out the old adhesive, re-leveling the slabs if needed, then re-gluing with a fresh epoxy. The crew checks the cabinets and supports to make sure the seam isn’t under stress. If the slabs have shifted or the cabinets have settled, the seam may pull apart again. In those cases, replacement is the more reliable fix.
Etching on marble or dolomite can sometimes be polished out, but the process removes a thin layer of stone, which can change the appearance over time. Polishing works best on light etching. Deep or widespread etching usually means the countertop needs to be replaced. There’s no way to add back the material that’s been chemically burned away.
If the damage is structural, like a crack that runs through the countertop’s support area, or a seam that’s pulling apart over a dishwasher, repair is a short-term fix. The countertop may look fine for a while, but the problem will come back. Replacement is the only way to ensure the countertop is stable and safe for daily use.
If the slab is outdated or doesn’t fit the space, replacement makes sense even if the damage is minor. Maybe the layout doesn’t work for how you use the kitchen, or the color clashes with the cabinets. Maybe the stone is porous and stains easily, or it’s a material that etches from everyday use. Replacing gives you a chance to pick a slab that fits your needs and holds up better over time.
If the damage is widespread, multiple chips, cracks, or dull spots, repairing can end up costing more than replacement. Each repair takes time, and the countertop may still look patched together. Replacing the whole slab gives a cleaner, more consistent look and avoids the hassle of multiple fixes.
If you’re selling or renting the property, replacement can be the smarter move. A repaired countertop may raise questions from buyers or tenants, while a new slab adds value and appeal. For rental or flip-grade projects, we work with a partner to source stone that fits the budget without sacrificing durability.
Start with the material. Hard stones like granite and quartzite hold up better to repairs, while softer stones like marble or some quartzites may not. Engineered quartz is non-porous and doesn’t need sealing, but it can be damaged by heat or UV exposure, and repairs may not blend as well. If the stone is prone to etching or staining, replacement might be the better long-term choice.
Look at the location of the damage. A chip on a corner is easier to repair than one in the middle of the countertop, where it’s more visible and more likely to take another hit. A crack near a sink or stove is more concerning than one on a low-traffic edge. If the damage is in a high-stress area, replacement is usually the safer call.
Consider the age and condition of the rest of the kitchen or bathroom. If the cabinets, backsplash, or appliances are outdated, replacing the countertop alone may not make sense. If the layout doesn’t work for how you use the space, a new countertop can be part of a larger update. If the rest of the room is in good shape, repair might be all you need.
Think about how long you plan to stay in the home. If you’re selling or renting soon, a repair might be enough to get the property on the market. If you’re staying long-term, replacement gives you a slab that fits your needs and holds up better over time. If you’re flipping the property, we can source stone that fits the budget without cutting corners on durability.
Call or email to set up a time for the crew to look at the damage. We’ll check the slab, the cabinets, and the layout, then tell you whether repair or replacement is the better call. If repair is possible, we’ll explain what the fix involves and how long it will take. If replacement is the better move, we’ll walk you through the process, from picking the slab to installation.
If you’re replacing, you’ll visit our Austin slab floor to pick the actual slab that goes into your home. We have 299 lots on the floor, so you can see the color, pattern, and veining in person. For rental or flip-grade projects, we work with a partner to source stone that fits the budget. Once you’ve picked the slab, the crew templates your space, fabricates the countertop, and handles installation, sink cutout and sink set included.
We give you dates in writing with the quote, so you know when the crew will show up and when the job will be done. The same crew handles every step, so there’s no confusion between the quote and the finished job. If you have questions, call or email, we’re reachable seven days a week. No sales pitch, no upsell, just the work that needs to be done.
$38 per square foot, cut, measure, and install included. Jobs over 1,000 square feet: $30 per square foot.
Sink cutout and sink set are included in the fabrication work. Non standard work is still quoted before work begins. Send the rough square footage and the rooms involved, or call (512) 297-7493 for a straight quote.
We use color-matched epoxy or resin, but the repair won’t be invisible. On dark or heavily patterned stones, the fill blends in better. On light or solid surfaces, the repair may still be visible, especially under direct light. The fill material also isn’t as hard as the original stone, so it can chip again if hit in the same spot.
It depends on the material and the location. Repairs on hard stones like granite or quartzite can last for years if the countertop is well-maintained. Repairs on softer stones like marble or some quartzites may not hold up as long. If the repair is in a high-traffic area, like near the sink or stove, it may need to be redone sooner.
We can fill and reinforce the crack, but if it’s in a high-stress area, the repair may not last. Water exposure and daily use can weaken the fill over time. If the crack is structural or the countertop is supporting weight, replacement is usually the better long-term solution.
Quartz can be repaired, but the fill may not blend as well as it does on natural stone. Engineered quartz is non-porous and doesn’t need sealing, but it can be damaged by heat or UV exposure. Repairs on quartz are best for small chips or cracks. For larger damage, replacement is often the cleaner solution.
Repairs can save time and avoid the hassle of a full replacement, but they’re not always permanent. The fill material may not match perfectly, and the repair can stand out, especially on light or glossy surfaces. If the damage is structural or the slab is outdated, replacement is usually the more reliable choice.
Tell us the rooms, the rough square footage and what you have in mind for repair or replace your countertops. You get a number for the whole job, in writing, before anyone cuts anything.