You manage units along the I-35 corridor. You need countertops that hold up through turnover and look consistent from one door to the next.
Rental properties ask different things from a countertop than a owner-occupied home. The surface has to survive a tenant cycle without looking worn. It has to clean up fast between turnovers. And when you have multiple units in the same complex, matching across floors matters. ATX Granite King works with a slab selection and fabrication partner that supplies rental grade and flip grade stone, so you do not pay for a showpiece slab when the unit is going to see normal wear from short term use.
The difference between rental grade and showpiece stone is not about durability. It is about color consistency and vein pattern. Rental grade granite and quartz come from the same importer floor in Austin. The slabs are solid material that templates, fabricates and installs the same way. They just cost less because the pattern is more uniform or the movement is simpler. For a unit that turns every twelve months that is what you need. You want a counter that does not chip, does not stain easily, and does not need babying.
Every counter in this shop is fabricated and installed by the same crew from start to finish. You pick the actual slab off the floor. The crew measures your cabinets, templates the top, fabricates it in their shop and sets it in place. Sink cutouts and sink sets are included in the fabrication work. There is no separate crew and no hand off that loses a detail. That helps keep the schedule for a rental where you are working around a vacancy window.
You can choose from the full slab floor when the unit calls for it. Or you can work with their slab selection and fabrication partner for rental grade and flip grade stone. That means a unit that turns frequently does not require a showpiece slab. The material is sound. The price reflects a simpler pattern.
The same people who template the job are the ones who fabricate it and install it. There is no separate template crew and no different install crew. That cuts down on miscommunication and keeps the job on track, which matters when you have a vacancy and need to turn the unit fast.
When you have ten units on the same floor you want them to look consistent. ATX Granite King works with a direct importer slab floor in Austin with 299 lots on the floor. You can buy multiple slabs from the same lot so every unit in a building gets the same stone. Uniformity is easy.
Rental grade is about the appearance of the slab, not the structure. Granite is granite. It is an igneous stone that is hard and heat tolerant. Quartzite is metamorphosed sandstone and is very hard. Marble is calcium based and etches from acids. Those physical characteristics are the same whether the slab costs more or less. What changes is the look. A showpiece slab has bold movement and dramatic color variation. A rental grade slab has a more even pattern and simpler veining. Both come off the same truck from the same importer.
For a rental property the simpler pattern is usually the smarter choice. It hides wear better. A tenant who sets a hot pan on the granite and leaves a faint mark will not leave a visible mark on a slab that has a uniform color and pattern. On a dramatic slab every mark stands out. Rental grade stone also tends to have fewer natural fissures because the pieces chosen for rental grade are tighter and more consistent. That matters in a unit that will not be maintained as carefully as an owner's primary home.
ATX Granite King keeps a slab selection and fabrication partner specifically for this kind of work. You do not have to walk the whole slab floor and guess which slabs are priced right for a rental. They can point you straight to the lots that are solid, consistent and priced for a unit that turns. You still pick the actual slab. You still get the same crew doing the template, fabrication and install. You just do not pay for a showpiece pattern.
The crew does not hand off the job. One person or a small crew templates the counter directly on your cabinets. They measure every angle, every corner, every drop. Those measurements go back to their shop where the same crew cuts the stone. Then they bring the finished top to your site and install it themselves. There is no data loss between a template person and a fabricator. What they see in your unit is what gets cut.
For a rental property this matters because the cabinets are not always square. Older buildings, flips, units that have been through multiple tenant cycles: the cabinets can rack. A crew that templates and installs can adjust for that. They know where they have to add a shim or trim a little extra. A crew that only templates and passes the work along would have to come back to fix a fit issue. That costs time and it costs money. The one crew approach keeps the schedule tight.
The crew gives you dates in writing with the quote. That lets you plan the vacancy. You know exactly when the old top comes out and when the new one goes in. Sink cutouts and sink sets are included in the fabrication work, so there is no separate plumber call for the sink unless you need one. The crew handles the sink as part of the counter install. That simplifies the turn for you.
Not every stone suits every rental. Granite is a solid choice for most units. It is hard, it handles heat, and it looks good. The downside is it is porous enough to want sealing. A tenant who spills red wine or oil and does not wipe it up can leave a stain if the seal is worn. You will need to seal the granite once a year or assign that to maintenance. If you want zero maintenance on the stone, engineered quartz does not need sealing. It is non porous and resists stains. But quartz can be damaged by direct heat from hot pans, and it can yellow after years of direct sun exposure through a window.
Quartzite is very hard and looks similar to marble but does not etch from acids the way marble does. Some quartzite slabs are softer and behave more like marble, so you have to know what you are buying. Porcelain slabs are tough and hold up to impact and heat. They are a newer option and work well for units where tenants are hard on surfaces. Marble is generally not a good choice for a rental. It etches from lemon juice, vinegar and many cleaners. Sealing does not stop etching. It will show marks no matter what.
For a standard rental unit a rental grade granite or a mid grade quartz is the practical call. Both survive daily use. Granite gives you a natural stone look. Quartz gives you an even surface that does not need sealing. The crew can show you slabs from both categories and talk through what works for your specific turnover cycle. They do not push one material because they fabricate all of them. The decision is based on what your unit actually needs.
When you have a complex with twelve units all the same floor plan, you want the countertops to match. Tenants notice if one unit has stone that looks completely different from the neighbors. ATX Granite King buys from a direct importer slab floor in Austin with 299 lots on the floor. A lot is a group of slabs that come from the same quarry block. They are all cut from the same rock, so the color and pattern are consistent across the whole lot.
If you need four slabs for four units, the crew can pick four slabs from the same lot. They can set aside the slabs you need and reserve them for your job. That means unit 201 and unit 202 get the same stone. If you are doing a whole building or a whole property, they can coordinate with the importer to hold the lot for you. You do not have to worry about the stone running out halfway through the project.
For rental grade stone the process is the same. The slabs come from the same importer floor. They are just selected for consistent pattern. You can buy enough slabs for every unit in a building from a single lot and get a uniform look. The crew handles the templating for each unit separately, but the material is the same. That keeps your properties looking intentional rather than mismatched.
Call ATX Granite King at (512) 297-7493. Tell them how many units you are doing, what material you are considering, and whether you already have a slab in mind or want to look at rental grade options. They will ask for rough measurements of the countertops. If the units have the same floor plan you only need measurements from one unit. They can give you a straight quote over the phone or come out to see the cabinets.
The quote includes the price for the slab, template, fabrication, install, sink cutout and sink set. You get dates in writing. You know exactly when the crew will be on site. You can schedule the work during a vacancy window. There are no surprise fees added after the quote. The price you are given is the price you pay unless you change the scope of the work.
You can also reach them by email at info@atxgraniteking.com. They are reachable seven days a week. If you are in Austin, Pflugerville, Round Rock, Cedar Park, Leander, Georgetown, Hutto, Jarrell, Salado, Belton, Temple, Killeen, Harker Heights or any of the I-35 corridor towns, they cover that area. Call for a straight quote. That is the fastest way to get a number and get your rental units turned.
$38 per square foot, cut, measure, and install included. Jobs over 1,000 square feet: $30 per square foot.
Sink cutout and sink set are included in the fabrication work. Non standard work is still quoted before work begins. Send the rough square footage and the rooms involved, or call (512) 297-7493 for a straight quote.
Yes. You go to the slab floor in Austin and pick the exact slab your crew will cut. For rental grade stone the crew can guide you to the lots that are priced for that purpose. You touch it, see the pattern and decide. There is no photo substitution. What you pick is what you get.
Yes, it is the same material. Rental grade granite is structurally identical to showpiece granite. The difference is the appearance. Both are hard, heat tolerant and want sealing. The downside is that a very uniform slab shows scratches and chips less than a dramatic slab does, so rental grade can actually look better longer in a high turnover unit.
The crew gives you dates in writing with the quote. They can work with your timeline, but they do not promise same day or next day. Call them and tell them your vacancy window. They will tell you if they can fit it. They are reachable seven days a week at (512) 297-7493.
Sink cutout and sink set are included in the fabrication work. The crew will cut the hole for your sink in the new slab and set the sink into place. They do not typically handle plumbing connections like supply lines or drain pipes. You will need a plumber for that unless the job is a simple drop in that connects to existing lines.
ATX Granite King does not require a minimum number of slabs. You can order one slab for a single unit or twenty slabs for a building. They work with a slab selection and fabrication partner that supplies rental grade stone in any quantity. Call for a straight quote and tell them how many units you have.
Tell us the rooms, the rough square footage and what you have in mind for rental property countertop refresh. You get a number for the whole job, in writing, before anyone cuts anything.