Pick a slab from a real Austin floor, then one crew templates, cuts, and installs it. Sink and grill cutouts included in the work.
Central Texas outdoor kitchens see triple-digit summer heat, winter freezes, and UV that fades some materials in a season. The stone you choose has to hold color, resist thermal shock, and drain water so it doesn’t pool under the grill or sink. ATX Granite King works with slabs that are tested outside in Austin’s climate, not just rated for it on paper.
Most Austin homes with outdoor kitchens are either mid-century bungalows in central neighborhoods where the yard is small and the counter has to fit an existing patio, or newer builds out on the I-35 corridor where the outdoor space is bigger but the slab still has to match the house’s style. The crew templates on site, so the cut fits the grill, sink, and any uneven edges in the build.
Every job starts with a slab you pick off the floor at a direct importer in Austin. There are two hundred ninety-nine lots on the floor, so you can see the actual piece that will go in your yard. The same crew that templates your job also fabricates and installs it, so there’s no handoff between shops or contractors.
Walk the floor at a direct importer in Austin and pick the actual slab that will go outside. The floor has two hundred ninety-nine lots, so you can compare color, pattern, and how the stone looks in natural light. The crew loads it, cuts it, and installs it, no middleman, no color surprises after the cut.
The crew templates on site with a laser, so the cutouts for the grill and sink match the exact appliances you’re using. Drainage is built into the template to keep water from pooling under the sink or grill. The sink is set and sealed during install, so it’s ready for plumbing the same day.
The same crew that templates your outdoor kitchen also fabricates and installs the counter. There’s no handoff between shops, no miscommunication on the cut, and no waiting for another contractor to show up. The crew gives you dates in writing with the quote, so you know when the work will be done.
Granite is a natural igneous stone that’s hard and heat tolerant, but it’s porous and usually needs sealing to resist stains from grill grease and rainwater. In most cases, it holds color in Austin’s sun, though some lighter granites can fade over time. It’s a common choice for outdoor kitchens in Travis County because it’s durable and available in a wide range of colors.
Quartzite is metamorphosed sandstone and is very hard, but some slabs sold as quartzite are softer and behave more like marble. The harder varieties resist scratches and UV fading, making them a good option for outdoor use. Quartzite is usually more expensive than granite, but it doesn’t need sealing and holds up well in heat and freeze cycles.
Engineered quartz is non-porous and needs no sealing, but it can be damaged by direct heat from a grill and by long UV exposure outdoors. In most cases, it’s not recommended for outdoor kitchens in Central Texas because the resin can yellow or warp in the sun. If you choose quartz, the crew will discuss placement to minimize heat and UV exposure.
The crew templates on site with a laser, so the measurements are exact for your grill, sink, and any uneven edges in the build. They mark the slab for cutouts, then take it back to the shop for fabrication. Drainage is built into the template to keep water from pooling under the sink or grill, which is important in Austin’s heavy rain events.
Fabrication includes sink cutouts and any custom edges you choose. The crew uses wet saws to cut the slab, so there’s no dust or debris left on site. If you’re adding a backsplash or side panels, those are cut from the same slab so the pattern matches. The crew seals the edges after the cut to protect against moisture.
Installation is done in one visit unless the build is large or complex. The crew levels the base, sets the slab, and seals the sink in place. They check for drainage and make sure the counter is stable before they leave. If you’re adding a grill or other appliances, the crew will coordinate with your plumber or electrician to make sure the cutouts line up.
Granite is durable and holds up in heat and freeze cycles, but it’s porous and usually needs sealing every year or two to resist stains. Lighter granites can fade in Austin’s sun, so darker or more uniform colors are a safer choice for outdoor use. It’s also heavy, so the base has to be built to support the weight, especially in older homes with smaller patios.
Quartzite is hard and resists UV fading, but some slabs sold as quartzite are softer and can etch from acids like lemon or vinegar. It’s also more expensive than granite, so it’s not always the best choice for rental properties or flips. The crew can show you slabs that are tested for outdoor use, so you know what you’re getting.
Marble and dolomite are calcium-based and will etch from acids, so they’re not ideal for outdoor kitchens where spills are common. Soapstone is non-porous and doesn’t need sealing, but it’s soft and can scratch easily. Porcelain slabs are heat and UV resistant, but they’re thin and can crack if the base isn’t perfectly level. The crew will discuss the tradeoffs of each material so you can decide what works for your build.
Start by walking the slab floor in Austin to see how the stones look in natural light. The crew can point out which materials hold up best outside and which ones to avoid for your specific build. If you’re matching an existing counter indoors, bring a sample or photo so you can compare colors and patterns.
Think about how you’ll use the space. If you grill often, choose a stone that resists heat and grease stains. If the counter will see a lot of sun, pick a material that doesn’t fade or yellow. If you’re renting the property or flipping it, the crew can show you rental-grade slabs that are durable but less expensive than showpiece pieces.
The crew will give you a straight quote with dates in writing, so you know what to expect. They’ll also discuss drainage, cutouts, and any custom edges you want. If you’re unsure about a material, they can show you examples of past outdoor jobs in Austin so you can see how the stone holds up over time.
Call or email to set up a time to walk the slab floor in Austin. The crew will meet you there to answer questions and show you which materials work best for outdoor kitchens. You’ll pick the actual slab that will go in your yard, so there are no surprises after the cut.
The crew will template your job on site, so the measurements are exact for your grill, sink, and any uneven edges. They’ll give you a straight quote with dates in writing, so you know when the work will be done. If you’re working with a contractor or plumber, the crew will coordinate with them to make sure the cutouts line up.
Once you approve the quote, the crew will fabricate and install the counter. They handle everything from the cut to the sink set, so you don’t have to manage multiple contractors. The crew is reachable seven days a week, so you can call with questions before, during, or after the job.
$38 per square foot, cut, measure, and install included. Jobs over 1,000 square feet: $30 per square foot.
Sink cutout and sink set are included in the fabrication work. Non standard work is still quoted before work begins. Send the rough square footage and the rooms involved, or call (512) 297-7493 for a straight quote.
Marble is calcium-based and will etch from acids like lemon, vinegar, or even rainwater, so it’s not ideal for outdoor use. It’s also porous and needs frequent sealing to resist stains. In most cases, the crew recommends granite, quartzite, or porcelain for outdoor kitchens in Central Texas because they hold up better in heat, sun, and freeze cycles.
Some stones, like lighter granites and certain marbles, can fade in direct sunlight over time. Engineered quartz can yellow or warp from UV exposure, so it’s not recommended for outdoor use. The crew can show you slabs that are tested for outdoor use and hold their color in Austin’s climate.
Granite, marble, and some quartzites are porous and usually need sealing to resist stains from grill grease and rainwater. Engineered quartz and soapstone are non-porous and don’t need sealing. The crew will discuss sealing requirements for the stone you choose and can recommend products that work well in Central Texas.
Stone is heavy, so the base has to be built to support the weight. In older Austin homes with smaller patios, the crew may recommend a lighter material like porcelain or a thinner slab. They’ll check the base during the template visit and let you know if any reinforcements are needed before install.
Engineered quartz is non-porous and doesn’t need sealing, but it can be damaged by direct heat from a grill and by long UV exposure outdoors. The resin in quartz can yellow or warp in the sun, so it’s not recommended for outdoor kitchens in Central Texas unless it’s placed in a shaded area away from heat sources.
Tell us the rooms, the rough square footage and what you have in mind for outdoor kitchen countertops in austin. You get a number for the whole job, in writing, before anyone cuts anything.