Leander homes along the 183A corridor run mostly new construction, and the kitchen counters are among the first things owners want to dial in. Our crew templates, fabricates and installs your countertops from the slab you choose, one crew from start to finish.
Williamson County has been adding rooftops fast, and Leander is one of the places where that shows up most. A lot of the housing stock is new, built in the last big wave of growth along the US 183A corridor. Those homes come with builder grade tops that do the job but rarely match the way the owner cooks or the way the kitchen feels. When a homeowner walks into a brand new house and sees a countertop that looks like every other house on the block, the first real project is usually changing it out.
ATX Granite King does not hand you a chip and ask you to guess. You pick the actual slab off a real Austin slab floor that carries 299 lots of granite, quartzite, quartz, marble, dolomite, soapstone, porcelain and semi precious. Then one crew handles the whole job: they template the space, cut and shape the stone in the shop, and come back to set it. Sink cutout and sink set are included in the fabrication work. There is no handoff between a salesperson, a measure tech and a different install crew.
Leander kitchens and baths need countertops that can take daily use and still look like what the owner chose. The stone has to be right for the way the house is lived in, not just for a photo. We work with granite, engineered quartz, quartzite, marble and the other materials listed above. For a rental or a flip that does not need a showpiece slab, we have a partner that supplies rental grade and flip grade stone so the project stays sensible. Call for a straight quote on any of it.
You walk a real slab floor in Austin, not a showroom with little samples. The stone varies from bundle to bundle, and a photo does not show the depth of the veining or the way the quartz catches light. You tag the exact slab you want, and that is the stone we use.
The same crew that templates your kitchen is the crew that fabricates and installs the tops. Nothing gets handed from a measure tech to a shop to a sub. That means the people who do the work know the stone and the job from the start, and you get one point of contact.
Not every job needs a premium slab. Through a slab selection and fabrication partner, we can supply rental grade and flip grade stone that holds up to tenants and looks clean without the cost of a showpiece. The same crew cuts and installs it.
Granite is a natural igneous stone. It is hard and handles heat well, so you can set a hot pan on it without a trivet in most cases. It is porous, though, which means it will absorb oil and water if it is not sealed. A good sealer buys you time, but granite countertops want resealing every so often depending on how the kitchen is used. In a Leander kitchen that sees a lot of cooking, that is a fact worth knowing upfront.
Quartz is engineered from ground stone and resin. It is non porous, so it does not need sealing and it resists stains from everyday spills. The tradeoff is that the resin does not like direct heat and can scorch or discolor if a hot pan is set on it. Long UV exposure, like a slab installed outdoors or in a sunroom with no shade, can also break down the resin over time. For most kitchens and bathrooms, quartz is a straightforward surface that stays consistent from slab to slab.
Quartzite is metamorphosed sandstone, and in ideal cases it is very hard, harder than granite. It can take heat and a lot of abuse. But the stone business has a problem: some slabs that are sold as quartzite are actually a softer stone that behaves more like marble. Those slabs will etch from acids like lemon juice and vinegar, and they scratch more easily. A buyer has to handle the slab and test it, which is why picking the slab in person matters.
The first step is you walk the slab floor. The floor is a direct importer yard in Austin, not a retail showroom, so the selection is what the bundles actually look like. You are not picking from a catalog. You tag the slab you want. At that point, the stone is yours. The crew does not substitute a different bundle or a different lot.
After you choose the slab, we template the kitchen or bathroom. The template captures the exact shape of the cabinets, the overhangs, the seam locations, and the sink cutout. The sink cutout and sink set are included in the fabrication work. The crew then takes the slab and the template back to the shop, cuts the stone, polishes the edges, and gets everything ready. The same crew returns to the house to install the finished pieces and set the sink.
The whole job is done by one crew from start to finish. There is no separate estimator, no separate install team. The crew that templates is the crew that cuts and the crew that installs. This cuts down on the information that gets lost between steps. In a Leander new build, where the cabinets are often square and the runs are straightforward, the work can go smooth, but the crew still gives dates in writing with the quote so you know the schedule.
Every stone has a downside. Granite is tough and heat tolerant, but it is porous. It needs sealing, and even with a sealer, a spill of red wine or oil that sits overnight can stain. The sealer does not make the stone bulletproof, it just gives you more time to wipe up. Quartz does not need sealing and is very stain resistant, but it cannot take direct heat. A hot skillet off the stove will leave a scorch mark that does not come out. In a kitchen where the cook slides pans across the counter, quartz demands a trivet or a pad.
Marble is calcium based, which means it etches. Lemon juice, vinegar, tomato sauce, even some cleaners will leave a dull mark on the surface regardless of sealing. The sealer can slow down staining, but it does nothing to stop etching. That is just the chemistry of the stone. For a bathroom vanity, etching is usually manageable. For a kitchen island where the prep happens, it can be a problem. Dolomite sits somewhere between marble and quartzite, and it can be harder than marble but still etches with acids.
Quartzite, when it is real quartzite, is extremely hard and resistant to etching. But the label on a slab is not always accurate. Some slabs that look like quartzite are actually a softer stone that will etch like marble. The only way to know is to put a few drops of acid on a scrap piece and see if it fizzes. The crew can help with that. Soapstone is non porous and inert, but it scratches and darkens over time. Porcelain slabs are tough and non porous, but they are thin and the fabrication requires different tools. Every choice has a tradeoff.
Think about how the kitchen is used. In a Leander household where the kitchen is the center of the house and the island gets heavy prep, heat and spills are a daily reality. A quartzite that has been tested and proven hard can take the abuse, and a dark granite with a good sealer can hide a lot of life. A pure white quartz might look clean, but a hot pan will ruin it. For a bathroom, where heat is not a factor and the mess is mostly soap and water, quartz or marble can work well.
The housing stock in Leander leans toward open floor plans, big islands, and a lot of natural light. The countertop is visible from the living room, so the look matters. But the look has to hold up. A slab with a lot of movement might look great on the day it is installed, but if the stone is soft and the kitchen is busy, that slab will show wear fast. We always tell people to handle the slab, run a fingernail over it, and ask the crew about the hardness of the bundle.
For a rental property or a flip, the decision is about durability and cost. The stone does not need to be a showpiece, it needs to survive tenants and still look acceptable for the next one. We work with a partner that supplies stone specifically for that purpose. The same crew installs it, and the sink cutout and sink set are included. Call and we can walk through the options and give a straight quote for the job.
The first step is to call or email. We are reachable seven days a week at (512) 297-7493 or info@atxgraniteking.com. When you call, we ask about the project: how many square feet, what rooms, what kind of stone you are thinking about. We can give you a straight quote for the work, with all the numbers in writing. No pricing is discussed without knowing the slab and the square footage, so the quote is real.
Once you have the quote, you can visit the slab floor in Austin. The floor is a direct importer yard with 299 lots on the floor at any time. You pick the slab you want, and we tag it. From there, the crew gives you a date for templating and a date for install. The timeline is laid out in writing with the quote, so you know what to expect. We do not promise same day or next day, but we do show up when we say we will.
We serve the whole I-35 corridor, including Leander, Pflugerville, Round Rock, Cedar Park, Georgetown, Hutto, Jarrell, Salado, Belton, Temple, Killeen, and Harker Heights. The crew comes to your home, templates the space, and then brings the finished stone back. The whole thing is done by the same people who know your job. Call or email to get a quote and set up a time to walk the slab floor.
$38 per square foot, cut, measure, and install included. Jobs over 1,000 square feet: $30 per square foot.
Sink cutout and sink set are included in the fabrication work. Non standard work is still quoted before work begins. Send the rough square footage and the rooms involved, or call (512) 297-7493 for a straight quote.
Yes, we work in Leander and all along the I-35 corridor. Our posted service area includes Austin, Pflugerville, Round Rock, Cedar Park, Leander, Georgetown, Hutto, Jarrell, Salado, Belton, Temple, Killeen, Harker Heights and the towns in between. We are a crew that shows up and does the work, so we drive to the job site.
The timeline depends on the slab you choose, the shop schedule, and the size of the job. We do not give a generic number of days. The crew writes the dates into the quote when you book, so you know the templating date and the install date up front. It is not a rush job, but it is a solid schedule.
Generally, yes. Granite is porous, so it will absorb oils and liquids if left unsealed. A good sealer slows that down, but it does not make the stone invincible. You still need to wipe up spills, especially red wine, oil, and strong colored liquids. Over time, the sealer wears off and the countertop needs resealing. How often depends on how you use the kitchen.
Quartz is engineered from ground stone and resin. It is non porous, needs no sealing, and stains barely show up. But it cannot take direct heat, and UV exposure can discolor it. Quartzite is a natural stone that is usually very hard and heat resistant, but some slabs sold as quartzite are actually softer stones that etch like marble. For a kitchen that sees a lot of cooking, a true quartzite is hard to beat, but you have to test the slab to know what you are getting.
That is a real risk with some quartzite labeled slabs. The stone will etch the same way marble does when it meets acid, and the only fix is to repolish the surface, which is a job for a professional. This is why we always tell buyers to handle the slab and test a scrap piece with a few drops of vinegar if they are unsure. The crew can help you check the stone before you commit. There is no sealer that stops etching, it is just the chemistry of the stone.
Tell us the rooms, the rough square footage and what you have in mind for countertops in leander. You get a number for the whole job, in writing, before anyone cuts anything.