You choose your actual slab from a real Austin slab floor. Then our crew handles templating, fabrication, and installation from start to finish.
ATX Granite King serves Belton and the I-35 corridor with custom countertops for kitchens and baths. Belton homes range from historic downtown houses to newer subdivisions, and each has its own needs. Our process starts with you picking the exact slab from a direct importer slab floor in Austin that carries 299 lots.
The same crew that templates your job fabricates and installs it. That means one team knows your project start to finish. Sink cutout and sink set are included in the fabrication work. We work with a slab selection and fabrication partner for rental grade and flip grade stone, so a rental property does not have to pay for a showpiece slab.
We handle granite, quartzite, engineered quartz, marble, dolomite, soapstone, and porcelain slabs. No two homes are the same. Call (512) 297-7493 or email info@atxgraniteking.com to talk about your Belton project and get a straight quote.
Visit our partner slab floor in Austin with 299 lots on display. You choose the exact slab for your kitchen or bath. No guessing from a sample. What you see is what gets templated, fabricated, and installed.
The same crew that templates your job fabricates and installs it. That means consistent communication and a single point of contact throughout your project. No handoffs between different teams.
Sink cutout and sink set are part of the fabrication work. No separate charge or subcontractor for that step. It is included in the quoted scope, so you know what you are getting.
Belton homeowners have a range of material options. Granite is a natural igneous stone that is hard and heat tolerant but porous enough to want sealing. Quartz is engineered from ground stone and resin, non porous, needs no sealing, and can be damaged by direct heat and long UV exposure outdoors. Quartzite is metamorphosed sandstone and is very hard, though some slabs sold as quartzite are softer and behave more like marble.
Marble is calcium based and etches from acids like lemon and vinegar regardless of sealing. Dolomite and soapstone offer other natural looks. Porcelain slabs are durable and come in large sizes. The right choice depends on where the countertop goes and how you use it. For a busy kitchen, granite or quartzite are usually reliable. For a bathroom vanity, marble can work with careful maintenance.
Newer subdivisions in Belton often have open layouts that benefit from large slab sizes. Older homes near historic downtown may have smaller or irregular spaces. The crew can handle both. Call to discuss which material fits your home and your daily use.
You come to the slab floor in Austin, which is a short drive up I-35 from Belton. The floor holds 299 lots from a direct importer. You walk the rows and pick the exact slab you want. No samples, no photos of someone else's stone. You see the veining, the color, and the movement in person.
If you are working on a rental property or a flip, we have a partnership that provides rental grade and flip grade stone. That means you do not have to pay for a showpiece slab. You still get a real stone countertop, but at a price point that makes sense for that kind of project.
After you select the slab, the crew templates your kitchen or bath in Belton. The slab is then fabricated to your exact measurements. The same crew installs it. You know from the start what your countertop will look like.
Belton's housing stock includes older homes, some from the early 1900s near the historic downtown, and newer subdivisions built in the last 20 years. Older homes may have existing countertops made of laminate or tile that need removal. The crew can handle that as part of the job. Make sure to discuss removal during your quote so there are no surprises.
Newer homes in Belton often have standard cabinet sizes and open floor plans. That makes templating straightforward. If your home has unique features like a curved island or a bar top, the crew has experience with those. The key is to measure accurately and account for any discrepancies in the existing cabinetry.
Belton is near Belton Lake, and some homes have outdoor kitchens or grilling areas. For outdoor countertops, quartz is not a good choice because UV exposure can damage it. Granite or porcelain are better for outdoor use. The crew can advise based on your specific setup.
After you pick your slab, the crew schedules a templating visit to your Belton home. They take precise measurements of your countertop area, including any backsplashes, cutouts, and edges. The template is used to fabricate the stone at the shop. Sink cutout and sink set are included in the fabrication work.
Fabrication happens off site. The crew cuts the slab to your template, polishes the edges, and prepares it for installation. They do not rush the job. They give you dates in writing with the quote so you know when to expect each step. No same day promises, just a clear schedule.
Installation is done by the same crew that templated and fabricated your countertop. They bring the finished pieces to your home, set them in place, and secure them. They also set the sink if you provided one. After installation, they clean up the work area. You are left with a countertop that fits your space exactly.
Call (512) 297-7493 or email info@atxgraniteking.com. The crew is reachable seven days a week. When you call, you will speak to someone who can answer your questions about materials, process, and what to expect. They will ask about your project, the size of your countertop area, and whether you have a slab preference.
The crew will then provide a straight quote in writing. The quote includes the cost of the slab (based on what you pick), fabrication, templating, installation, and sink cutout. No hidden fees. They also give you the timeline in writing. If you need to remove old countertops, discuss that during the call so it can be included.
After you accept the quote, you go to the slab floor in Austin to make your selection. The crew handles the rest. Serving Belton and the full I-35 corridor from Austin to north of Temple, ATX Granite King makes the process straightforward. Call to get started.
$38 per square foot, cut, measure, and install included. Jobs over 1,000 square feet: $30 per square foot.
Sink cutout and sink set are included in the fabrication work. Non standard work is still quoted before work begins. Send the rough square footage and the rooms involved, or call (512) 297-7493 for a straight quote.
Yes. You visit the slab floor in Austin and pick the exact slab you want. There are 299 lots on the floor from a direct importer. You see the full slab, not a sample. What you pick is what gets fabricated and installed.
Granite is a natural igneous stone that is hard and heat tolerant but porous enough to want sealing. Quartz is engineered from ground stone and resin, non porous, needs no sealing, and can be damaged by direct heat and long UV exposure outdoors. Both are durable, but they handle heat and maintenance differently.
We can include removal of your existing countertops in the quote. Let us know when you call so we can account for the labor and disposal. The crew handles it as part of the job so you do not have to coordinate a separate contractor.
Marble is calcium based and etches from acids like lemon and vinegar regardless of sealing. In a kitchen, spills are common, so marble will develop etch marks over time. Many people accept that as patina, but if you want a low maintenance surface, granite or quartz are usually a better choice for a kitchen.
The crew gives you dates in writing with the quote. The timeline depends on slab availability, templating schedule, and fabrication time. No same day or next day promises. Call for a quote and you will get a clear schedule for your Belton project.
Tell us the rooms, the rough square footage and what you have in mind for countertops in belton. You get a number for the whole job, in writing, before anyone cuts anything.