Choose your slab from a 299-lot Austin floor, then let one crew template, cut, and install your Buda bathroom vanity top. Sink cutout and set included.
Buda’s housing stock runs from pre-war bungalows with tight powder rooms to newer Hill Country-style homes with double-sink master baths. A stone vanity top can fit either: remnant pieces work for small single-bowl tops, while full slabs handle the long double-bowl runs in the bigger houses.
ATX Granite King serves Austin and the I-35 corridor. Buda is south of the posted service area, so call the crew to confirm the run before anything is scheduled. They’ll give you a straight quote and written dates for templating, fabrication, and installation.
You pick the actual slab off the floor of a direct importer in Austin, 299 lots of granite, quartzite, engineered quartz, marble, dolomite, soapstone, porcelain, and semi-precious. One crew handles templating, fabrication, and installation, including sink cutout and set.
Most Buda powder rooms take a 25-inch to 30-inch single-bowl top with a 4-inch backsplash. Master baths often need 60-inch to 72-inch double-bowl tops with a full-height backsplash or side splashes. The crew templates on-site, so the sink cutouts match the bowls you’ve already bought or ordered.
Small vanities under 30 inches can use remnant pieces, which are leftover slabs from bigger jobs. Remnants cost less and reduce waste, but the color and pattern choices are limited to what’s on the remnant rack. The crew will show you what’s available when you call for a quote.
Fabrication includes cutting the hole for your sink and setting the sink in place. The crew can handle under-mount, drop-in, or vessel sinks. If you’re keeping an existing faucet, they’ll template the holes to match; if you’re buying new, they’ll cut for standard hole spacing.
Granite is a natural igneous stone that’s hard and heat-tolerant but porous enough to want sealing. In most cases, it holds up well in a bathroom, but some lighter granites can show water spots if sealing is skipped. The crew will tell you if the slab you pick needs extra attention to keep it looking clean.
Engineered quartz is made from ground stone and resin, so it’s non-porous and needs no sealing. It won’t stain from makeup or toothpaste, but direct heat from a curling iron can damage the resin. Quartz is also not recommended for outdoor use because long UV exposure can cause fading or discoloration over time.
Marble is calcium-based and etches from acids like lemon juice or vinegar, even if it’s sealed. In a bathroom, etching usually shows up as dull spots from soap scum or cleaning products. Some homeowners like the patina that develops over time; others prefer to avoid marble in high-use bathrooms.
The crew comes to your Buda home with a laser template kit. They measure the vanity base, mark the sink location, and note any backsplash or side splash dimensions. If you’re replacing an existing top, they’ll check for level and squareness, older homes sometimes have uneven bases that need shimming before installation.
Fabrication happens in their Austin shop. The slab you picked is cut to size, polished on the edges, and drilled for faucet holes if needed. Sink cutouts are done with a water-jet or CNC router to avoid chipping. The crew will call you when the top is ready for installation, usually within a few days of templating.
For remnant jobs, the process is the same, but the slab is already cut to a smaller size. The crew will show you the remnant pieces available when you call for a quote, so you can pick one that fits your vanity dimensions. Remnants are first-come, first-served, so the selection changes often.
Granite is durable and heat-resistant, but lighter colors can show water spots if not sealed regularly. Darker granites hide stains better but may show fingerprints and smudges more easily. Sealing is a simple wipe-on process, but it’s an extra step you’ll need to remember every year or two.
Quartz is low-maintenance and stain-proof, but it’s not heat-proof. A hot curling iron left on the surface can melt the resin, leaving a permanent mark. Quartz is also heavier than natural stone, so your vanity base needs to be sturdy enough to support the weight, older homes with particleboard bases may need reinforcement.
Marble is beautiful but high-maintenance. It etches from acids, so even sealed marble can develop dull spots from soap or cleaning products. Some homeowners like the aged look, but if you prefer a pristine surface, marble may not be the best choice for a high-use bathroom. Dolomite is a harder alternative that behaves more like granite.
Single-bowl vanities in Buda’s older homes often max out at 30 inches wide. A 4-inch backsplash is standard for these, but you can skip it if you prefer a cleaner look. Double-bowl vanities in newer homes usually need a 60-inch to 72-inch top with a full-height backsplash or side splashes to protect the walls from water.
Edge profiles range from simple eased edges to more decorative ogee or bullnose styles. Eased edges are the most common for bathrooms because they’re easy to clean and less likely to chip. Decorative edges cost more and can be harder to keep free of grime, especially in a high-use bathroom.
If you’re using a remnant, the edge profile may be limited by the size of the piece. The crew will let you know what’s possible when you pick your slab. For full slabs, you can choose any edge profile, but keep in mind that more intricate edges take longer to fabricate and may add to the timeline.
Call ATX Granite King to confirm they can run to your Buda address. The posted service area is Austin and the I-35 corridor, so Buda is outside the usual zone, call first to avoid scheduling issues. They’ll give you a straight quote and written dates for templating, fabrication, and installation.
Visit the slab floor in Austin to pick your material. The floor has 299 lots, so you can compare granite, quartz, marble, and other stones in person. The crew will walk you through the options and help you pick a slab that fits your vanity size and budget. If you’re using a remnant, they’ll show you what’s available.
Once you’ve picked your slab, the crew will schedule templating at your home. They’ll measure the vanity base, mark the sink location, and note any backsplash or edge details. After fabrication, they’ll install the top, set the sink, and seal the stone if needed. The whole process is handled by one crew from start to finish.
The posted service area is Austin and the I-35 corridor. Buda sits in Hays County on that corridor, so it is a normal call to take, but it is not on the posted list. Ring (512) 297-7493 and confirm the run to your address before you plan anything around a date.
$38 per square foot, cut, measure, and install included. Jobs over 1,000 square feet: $30 per square foot.
Sink cutout and sink set are included in the fabrication work. Non standard work is still quoted before work begins. Send the rough square footage and the rooms involved, or call (512) 297-7493 for a straight quote.
Remnants are usually too small for double-bowl vanities, which often need 60-inch to 72-inch tops. The remnant rack mostly has pieces under 40 inches, so they’re better suited for single-bowl vanities or small powder rooms. The crew will let you know what’s available when you call for a quote.
Under-mount sinks look clean but require a solid surface to support the weight. If your vanity base is particleboard or plywood, it may not be strong enough to hold an under-mount sink without reinforcement. The crew will check your base during templating and let you know if any upgrades are needed.
Granite, marble, and some quartzite slabs need sealing to prevent stains. Engineered quartz and porcelain do not. The crew will tell you if your slab needs sealing and how often to reapply it. Sealing is a simple wipe-on process, but it’s an extra step to remember.
Yes, the crew can template the holes to match your existing faucet. If you’re buying a new faucet, they’ll cut for standard hole spacing. Let them know during templating so they can mark the exact locations and avoid mistakes during fabrication.
Older Buda homes often have uneven vanity bases. The crew will check for level during templating and shim the base if needed before installation. If the base is too far out of level, they may recommend reinforcing or replacing it to avoid problems with the sink or countertop.
Tell us the rooms, the rough square footage and what you have in mind for bathroom vanity tops in buda. You get a number for the whole job, in writing, before anyone cuts anything.